Set Options On A Given Xsl Processor, Set The Scheme

Problem running php on nginx ubuntu (files get downloaded)

Hi everyone,
I'm very new to php and ran into some issue that I have been trying to fix for a couple of hours.
I have setup Nginx on ubuntu 19.10, and installed php7.4-fpm. But whenever I try to open a file like index.php, located in my root folder /vawww/html (so localhost/index.php) it will download the file instead of running it.
Nginx is not communicating with php7.4-fpm, is my guess, but I can not find the mistake in my configuration files..

Could anyone take a look and spot what would be wrong.
Below I've put the files, in order
  1. /etc/nginx/fastcgi.conf:
  2. /etc/nginx/fastcgi_params:
  3. /etc/nginx/sites-enabled/server.conf
  4. /etc/nginx/mime.types
  5. /etc/php/7.4/fpm/php-fpm.conf
  6. /etc/php/7.4/fpm/pool.d/www.conf
  7. selection of /etc/php/7.4/fpm/php.ini since posting it all is too long
  8. output service nginx status & service php7.4-fpm status

If I'm looking at the wrong files or something and the error could be located elsewhere please guide me in the right direction.
And if you already read this far, I would like to thank you for your time!

1/etc/nginx/fastcgi.conf:


fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param REQUEST_SCHEME $scheme; fastcgi_param HTTPS $https if_not_empty; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; 

2. /etc/nginx/fastcgi_params:

fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param REQUEST_SCHEME $scheme; fastcgi_param HTTPS $https if_not_empty; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; 

3. /etc/nginx/sites-enabled/server.conf

# Version=2.1 server { listen 80; listen [::]:80; listen 443 ssl http2; listen [::]:443 ssl http2; # # This file will be managed by ATK, and overwitten without warning. # # To enable external access please consider installing DuckDNS using ATK. # # For external access using a custom domain: # # 1) Make a copy of this file and rename it to match your domain # # ex: /etc/nginx/sites-available/mydomain.com.conf # # 2) Edit your file and replace the entire `server_name` line with `server_name mydomain.com;` # # (do not include IP addresses) # # 3) Run `sudo ln -s /etc/nginx/sites-available/mydomain.com.conf /etc/nginx/sites-enabled/mydomain.com.conf` # # 4) Run `sudo systemctl reload nginx` # # You can then use ATK to run Certbot on your custom domain for HTTPS # # You can also modify your new file to enabling some of the extra features below by uncommenting the lines # # If you modify your file you will need to rerun the command in step 4 above server_name 127.0.0.1 localhost 192.168.1.248 0.0.0.0; access_log /valog/nginx/server.atomic.access.log; error_log /valog/nginx/server.atomic.error.log; index index.html index.php; root /vawww/html/; client_body_buffer_size 128k; client_max_body_size 100M; send_timeout 5m; server_tokens off; location ~ \.php$ { fastcgi_split_path_info ^(.+\.php)(/.+)$; fastcgi_pass unix:/varun/php7.4-fpm.sock; fastcgi_index index.php; include fastcgi.conf;} location ~ /\.ht { deny all; } ## # Snippet Config ## include /etc/nginx/snippets/gzip.atomic.conf; # include /etc/nginx/snippets/headers-hsts.atomic.conf; # WARNING: Only enable Strict Transport after confirming HTTPS is working include /etc/nginx/snippets/headers.atomic.conf; # include /etc/nginx/snippets/https-redirect.atomic.conf; # WARNING: Only enable HTTPS Redirect after confirming HTTPS is working include /etc/nginx/snippets/letsencrypt.atomic.conf; include /etc/nginx/snippets/proxy.atomic.conf; # include /etc/nginx/snippets/ssl-dhparam.atomic.conf; # WARNING: Only enable dhparam after running `openssl dhparam -out /etc/nginx/dhparam.pem 4096` include /etc/nginx/snippets/ssl.atomic.conf; ## # App Location Config ## include /etc/nginx/locations-enabled/*.atomic.conf; ssl_certificate /etc/letsencrypt/live/****/fullchain.pem; # managed by Certbot ssl_certificate_key /etc/letsencrypt/live/****/privkey.pem; # managed by Certbot } 

4. /etc/nginx/mime.types

types { text/html html htm shtml; text/css css; text/xml xml; image/gif gif; image/jpeg jpeg jpg; application/javascript js; application/atom+xml atom; application/rss+xml rss; text/mathml mml; text/plain txt; text/vnd.sun.j2me.app-descriptor jad; text/vnd.wap.wml wml; text/x-component htc; image/png png; image/tiff tif tiff; image/vnd.wap.wbmp wbmp; image/x-icon ico; image/x-jng jng; image/x-ms-bmp bmp; image/svg+xml svg svgz; image/webp webp; application/font-woff woff; application/java-archive jar war ear; application/json json; application/mac-binhex40 hqx; application/msword doc; application/pdf pdf; application/postscript ps eps ai; application/rtf rtf; application/vnd.apple.mpegurl m3u8; application/vnd.ms-excel xls; application/vnd.ms-fontobject eot; application/vnd.ms-powerpoint ppt; application/vnd.wap.wmlc wmlc; application/vnd.google-earth.kml+xml kml; application/vnd.google-earth.kmz kmz; application/x-7z-compressed 7z; application/x-cocoa cco; application/x-java-archive-diff jardiff; application/x-java-jnlp-file jnlp; application/x-makeself run; application/x-perl pl pm; application/x-pilot prc pdb; application/x-rar-compressed rar; application/x-redhat-package-manager rpm; application/x-sea sea; application/x-shockwave-flash swf; application/x-stuffit sit; application/x-tcl tcl tk; application/x-x509-ca-cert der pem crt; application/x-xpinstall xpi; application/xhtml+xml xhtml; application/xspf+xml xspf; application/zip zip; application/octet-stream bin exe dll; application/octet-stream deb; application/octet-stream dmg; application/octet-stream iso img; application/octet-stream msi msp msm; application/vnd.openxmlformats-officedocument.wordprocessingml.document docx; application/vnd.openxmlformats-officedocument.spreadsheetml.sheet xlsx; application/vnd.openxmlformats-officedocument.presentationml.presentation pptx; audio/midi mid midi kar; audio/mpeg mp3; audio/ogg ogg; audio/x-m4a m4a; audio/x-realaudio ra; video/3gpp 3gpp 3gp; video/mp2t ts; video/mp4 mp4; video/mpeg mpeg mpg; video/quicktime mov; video/webm webm; video/x-flv flv; video/x-m4v m4v; video/x-mng mng; video/x-ms-asf asx asf; video/x-ms-wmv wmv; video/x-msvideo avi; } 

5. /etc/php/7.4/fpm/php-fpm.conf

;;;;;;;;;;;;;;;;;;;;; ; FPM Configuration ; ;;;;;;;;;;;;;;;;;;;;; ; All relative paths in this configuration file are relative to PHP's install ; prefix (/usr). This prefix can be dynamically changed by using the ; '-p' argument from the command line. ;;;;;;;;;;;;;;;;;; ; Global Options ; ;;;;;;;;;;;;;;;;;; [global] ; Pid file ; Note: the default prefix is /var ; Default Value: none ; Warning: if you change the value here, you need to modify systemd ; service PIDFile= setting to match the value here. pid = /run/php/php7.4-fpm.pid ; Error log file ; If it's set to "syslog", log is sent to syslogd instead of being written ; into a local file. ; Note: the default prefix is /var ; Default Value: log/php-fpm.log error_log = /valog/php7.4-fpm.log ;syslog.facility = daemon ;syslog.ident = php-fpm ;log_level = notice ;log_limit = 4096 ;log_buffering = no ;emergency_restart_threshold = 0 ;emergency_restart_interval = 0 ;process_control_timeout = 0 ; process.max = 128 ; process.priority = -19 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes ;daemonize = yes ;rlimit_files = 1024 ;rlimit_core = 0 ;events.mechanism = epoll ; When FPM is built with systemd integration, specify the interval, ; in seconds, between health report notification to systemd. ; Set to 0 to disable. ; Available Units: s(econds), m(inutes), h(ours) ; Default Unit: seconds ; Default value: 10 ;systemd_interval = 10 ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; Multiple pools of child processes may be started with different listening ; ports and different management options. The name of the pool will be ; used in logs and stats. There is no limitation on the number of pools which ; FPM can handle. Your system will tell you anyway :) ; Include one or more files. If glob(3) exists, it is used to include a bunch of ; files from a glob(3) pattern. This directive can be used everywhere in the ; file. ; Relative path can also be used. They will be prefixed by: ; - the global prefix if it's been set (-p argument) ; - /usr otherwise include=/etc/php/7.4/fpm/pool.d/*.conf 

6. /etc/php/7.4/fpm/pool.d/www.conf

; Start a new pool named 'www'. [www] ;prefix = /path/to/pools/$pool user = user group = user listen = /varun/php/php7.4-fpm.sock listen.owner = user listen.group = user ;listen.mode = 0660 pm = dynamic pm.max_children = 5 pm.start_servers = 2 pm.min_spare_servers = 1 pm.max_spare_servers = 3 ;chroot = ;chdir = /vawww ;catch_workers_output = yes ;decorate_workers_output = no ;clear_env = no 7. /etc/php/7.4/fpm/php.ini [PHP] engine = On short_open_tag = Off precision = 14 output_buffering = 4096 zlib.output_compression = Off implicit_flush = Off unserialize_callback_func = serialize_precision = -1 ;open_basedir = disable_functions = pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wifcontinued,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_get_handler,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority,pcntl_async_signals,pcntl_unshare, disable_classes = zend.enable_gc = On zend.exception_ignore_args = On ;;;;;;;;;;;;;;;;; ; Miscellaneous ; ;;;;;;;;;;;;;;;;; expose_php = Off ;;;;;;;;;;;;;;;;;;; ; Resource Limits ; ;;;;;;;;;;;;;;;;;;; max_execution_time = 360 max_input_time = 360 ;max_input_nesting_level = 64 ; How many GET/POST/COOKIE input variables may be accepted ;max_input_vars = 1000 ; Maximum amount of memory a script may consume (128MB) ; http://php.net/memory-limit memory_limit = 512M ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Error handling and logging ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT display_errors = Off display_startup_errors = Off log_errors = On log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On ;;;;;;;;;;;;;;;;; ; Data Handling ; ;;;;;;;;;;;;;;;;; variables_order = "GPCS" request_order = "GP" register_argc_argv = Off auto_globals_jit = On post_max_size = 8M auto_prepend_file = auto_append_file = default_mimetype = "text/html" default_charset = "UTF-8" ;;;;;;;;;;;;;;;;;;;;;;;;; ; Paths and Directories ; ;;;;;;;;;;;;;;;;;;;;;;;;; doc_root = user_dir = enable_dl = Off ;cgi.force_redirect = 1 ;cgi.nph = 1 ;cgi.redirect_status_env = ;cgi.fix_pathinfo=1 ;cgi.discard_path=1 ;fastcgi.impersonate = 1 ;fastcgi.logging = 0 ;cgi.rfc2616_headers = 0 ;cgi.check_shebang_line=1 ;;;;;;;;;;;;;;;; ; File Uploads ; ;;;;;;;;;;;;;;;; file_uploads = On upload_max_filesize = 250M max_file_uploads = 20 ;;;;;;;;;;;;;;;;;; ; Fopen wrappers ; ;;;;;;;;;;;;;;;;;; allow_url_fopen = On allow_url_include = Off ;user_agent="PHP" default_socket_timeout = 320 ;auto_detect_line_endings = Off ;;;;;;;;;;;;;;;;;;;;;; ; Dynamic Extensions ; ;;;;;;;;;;;;;;;;;;;;;; ;extension=bz2 ;extension=curl ;extension=ffi ;extension=ftp ;extension=fileinfo ;extension=gd2 ;extension=gettext ;extension=gmp ;extension=intl ;extension=imap ;extension=ldap ;extension=mbstring ;extension=exif ; Must be after mbstring as it depends on it ;extension=mysqli ;extension=oci8_12c ; Use with Oracle Database 12c Instant Client ;extension=odbc ;extension=openssl ;extension=pdo_firebird ;extension=pdo_mysql ;extension=pdo_oci ;extension=pdo_odbc ;extension=pdo_pgsql ;extension=pdo_sqlite ;extension=pgsql ;extension=shmop ;extension=snmp ;extension=soap ;extension=sockets ;extension=sodium ;extension=sqlite3 ;extension=tidy ;extension=xmlrpc ;extension=xsl ;;;;;;;;;;;;;;;;;;; ; Module Settings ; ;;;;;;;;;;;;;;;;;;; [CLI Server] cli_server.color = On [Date] ;date.timezone = [filter] ; http://php.net/filter.default ;filter.default = unsafe_raw ; http://php.net/filter.default-flags ;filter.default_flags = [iconv] ;iconv.input_encoding = ;iconv.internal_encoding = ;iconv.output_encoding = [imap] ;imap.enable_insecure_rsh=0 [intl] ;intl.error_level = E_WARNING ;intl.use_exceptions = 0 [sqlite3] ;sqlite3.extension_dir = ;sqlite3.defensive = 1 [Pcre] ;pcre.backtrack_limit=10000 ;pcre.recursion_limit=100000 ;pcre.jit=1 [Pdo] ;pdo_odbc.connection_pooling=strict ;pdo_odbc.db2_instance_name [Pdo_mysql] ; Default socket name for local MySQL connects. If empty, uses the built-in ; MySQL defaults. pdo_mysql.default_socket= [Phar] ; http://php.net/phar.readonly ;phar.readonly = On ; http://php.net/phar.require-hash ;phar.require_hash = On ;phar.cache_list = [mail function] ; For Win32 only. ; http://php.net/smtp SMTP = localhost ; http://php.net/smtp-port smtp_port = 25 ; For Win32 only. ; http://php.net/sendmail-from ;sendmail_from = [email protected] ; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). ; http://php.net/sendmail-path ;sendmail_path = ;mail.force_extra_parameters = ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename mail.add_x_header = Off ; The path to a log file that will log all mail() calls. Log entries include ; the full path of the script, line number, To address and headers. ;mail.log = ; Log mail to syslog (Event Log on Windows). ;mail.log = syslog [ODBC] ; http://php.net/odbc.default-db ;odbc.default_db = Not yet implemented ; http://php.net/odbc.default-user ;odbc.default_user = Not yet implemented ; http://php.net/odbc.default-pw ;odbc.default_pw = Not yet implemented ; Controls the ODBC cursor model. ; Default: SQL_CURSOR_STATIC (default). ;odbc.default_cursortype ; Allow or prevent persistent links. ; http://php.net/odbc.allow-persistent odbc.allow_persistent = On ; Check that a connection is still valid before reuse. ; http://php.net/odbc.check-persistent odbc.check_persistent = On ; Maximum number of persistent links. -1 means no limit. ; http://php.net/odbc.max-persistent odbc.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. ; http://php.net/odbc.max-links odbc.max_links = -1 ; Handling of LONG fields. Returns number of bytes to variables. 0 means ; passthru. ; http://php.net/odbc.defaultlrl odbc.defaultlrl = 4096 ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation ; of odbc.defaultlrl and odbc.defaultbinmode ; http://php.net/odbc.defaultbinmode odbc.defaultbinmode = 1 [MySQLi] ; Maximum number of persistent links. -1 means no limit. ; http://php.net/mysqli.max-persistent mysqli.max_persistent = -1 ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements ; http://php.net/mysqli.allow_local_infile ;mysqli.allow_local_infile = On ; Allow or prevent persistent links. ; http://php.net/mysqli.allow-persistent mysqli.allow_persistent = On ; Maximum number of links. -1 means no limit. ; http://php.net/mysqli.max-links mysqli.max_links = -1 ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look ; at MYSQL_PORT. ; http://php.net/mysqli.default-port mysqli.default_port = 3306 ; Default socket name for local MySQL connects. If empty, uses the built-in ; MySQL defaults. ; http://php.net/mysqli.default-socket mysqli.default_socket = ; Default host for mysqli_connect() (doesn't apply in safe mode). ; http://php.net/mysqli.default-host mysqli.default_host = ; Default user for mysqli_connect() (doesn't apply in safe mode). ; http://php.net/mysqli.default-user mysqli.default_user = ; Default password for mysqli_connect() (doesn't apply in safe mode). ; Note that this is generally a *bad* idea to store passwords in this file. ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") ; and reveal this password! And of course, any users with read access to this ; file will be able to reveal the password as well. ; http://php.net/mysqli.default-pw mysqli.default_pw = ; Allow or prevent reconnect mysqli.reconnect = Off [mysqlnd] ; Enable / Disable collection of general statistics by mysqlnd which can be ; used to tune and monitor MySQL operations. mysqlnd.collect_statistics = On ; Enable / Disable collection of memory usage statistics by mysqlnd which can be ; used to tune and monitor MySQL operations. mysqlnd.collect_memory_statistics = Off ; Records communication from all extensions using mysqlnd to the specified log ; file. ; http://php.net/mysqlnd.debug ;mysqlnd.debug = ; Defines which queries will be logged. ;mysqlnd.log_mask = 0 ; Default size of the mysqlnd memory pool, which is used by result sets. ;mysqlnd.mempool_default_size = 16000 ; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. ;mysqlnd.net_cmd_buffer_size = 2048 ; Size of a pre-allocated buffer used for reading data sent by the server in ; bytes. ;mysqlnd.net_read_buffer_size = 32768 ; Timeout for network requests in seconds. ;mysqlnd.net_read_timeout = 31536000 ; SHA-256 Authentication Plugin related. File with the MySQL server public RSA ; key. ;mysqlnd.sha256_server_public_key = [OCI8] ;oci8.privileged_connect = Off ;oci8.max_persistent = -1 ;oci8.persistent_timeout = -1 ;oci8.ping_interval = 60 ;oci8.connection_class = ;oci8.events = Off ;oci8.statement_cache_size = 20 ;oci8.default_prefetch = 100 ;oci8.old_oci_close_semantics = Off [PostgreSQL] pgsql.allow_persistent = On pgsql.auto_reset_persistent = Off ; Maximum number of persistent links. -1 means no limit. ; http://php.net/pgsql.max-persistent pgsql.max_persistent = -1 ; Maximum number of links (persistent+non persistent). -1 means no limit. ; http://php.net/pgsql.max-links pgsql.max_links = -1 pgsql.ignore_notice = 0 pgsql.log_notice = 0 [bcmath] ; Number of decimal digits for all bcmath functions. ; http://php.net/bcmath.scale bcmath.scale = 0 [browscap] ; http://php.net/browscap ;browscap = extra/browscap.ini [Session] session.save_handler = files ;session.save_path = "/valib/php/sessions" session.use_strict_mode = 0 ; Whether to use cookies. ; http://php.net/session.use-cookies session.use_cookies = 1 ; http://php.net/session.cookie-secure ;session.cookie_secure = session.use_only_cookies = 1 session.name = PHPSESSID session.auto_start = 0 session.cookie_lifetime = 0 session.cookie_path = / session.cookie_domain = session.cookie_httponly = session.cookie_samesite = ; Handler used to serialize data. php is the standard serializer of PHP. ; http://php.net/session.serialize-handler session.serialize_handler = php session.gc_probability = 0 session.gc_divisor = 1000 ; After this number of seconds, stored data will be seen as 'garbage' and ; cleaned up by the garbage collection process. ; http://php.net/session.gc-maxlifetime session.gc_maxlifetime = 1440 session.referer_check = ; Set to {nocache,private,public,} to determine HTTP caching aspects ; or leave this empty to avoid sending anti-caching headers. ; http://php.net/session.cache-limiter session.cache_limiter = nocache ; Document expires after n minutes. ; http://php.net/session.cache-expire session.cache_expire = 180 session.use_trans_sid = 0 ; Default Value: 32 ; Development Value: 26 ; Production Value: 26 session.sid_length = 26 session.trans_sid_tags = "a=href,area=href,frame=src,form=" ; Default Value: "" ; Development Value: "" ; Production Value: "" ;session.trans_sid_hosts="" session.sid_bits_per_character = 5 ;session.upload_progress.enabled = On ;session.upload_progress.cleanup = On ;session.upload_progress.prefix = "upload_progress_" ;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS" ;session.upload_progress.freq = "1%" ;session.upload_progress.min_freq = "1" ; Only write session data when session data is changed. Enabled by default. ; http://php.net/session.lazy-write ;session.lazy_write = On [Assertion] ; Switch whether to compile assertions at all (to have no overhead at run-time) ; -1: Do not compile at all ; 0: Jump over assertion at run-time ; 1: Execute assertions ; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1) ; Default Value: 1 ; Development Value: 1 ; Production Value: -1 ; http://php.net/zend.assertions zend.assertions = -1 ;assert.active = On ;assert.exception = On ;assert.warning = On ;assert.bail = Off ;assert.callback = 0 ;assert.quiet_eval = 0 [COM] ;com.typelib_file = ;com.allow_dcom = true ;com.autoregister_typelib = true ;com.autoregister_casesensitive = false ;com.autoregister_verbose = true ;com.code_page= [mbstring] ;mbstring.language = Japanese ;mbstring.internal_encoding = ;mbstring.http_input = ;mbstring.http_output = ;mbstring.encoding_translation = Off ;mbstring.detect_order = auto ;mbstring.substitute_character = none ;mbstring.func_overload = 0 ;mbstring.strict_detection = On ;mbstring.http_output_conv_mimetype= ;mbstring.regex_stack_limit=100000 ;mbstring.regex_retry_limit=1000000 [gd] ;gd.jpeg_ignore_warning = 1 [exif] ;exif.encode_unicode = ISO-8859-15 ;exif.decode_unicode_motorola = UCS-2BE ;exif.decode_unicode_intel = UCS-2LE ;exif.encode_jis = ;exif.decode_jis_motorola = JIS ;exif.decode_jis_intel = JIS [Tidy] tidy.clean_output = Off [soap] soap.wsdl_cache_enabled=1 soap.wsdl_cache_dir="/tmp" soap.wsdl_cache_ttl=86400 soap.wsdl_cache_limit = 5 [sysvshm] ;sysvshm.init_mem = 10000 [ldap] ; Sets the maximum number of open links or -1 for unlimited. ldap.max_links = -1 [dba] ;dba.default_handler= [opcache] ; Determines if Zend OPCache is enabled ;opcache.enable=1 ; Determines if Zend OPCache is enabled for the CLI version of PHP ;opcache.enable_cli=0 ; The OPcache shared memory storage size. ;opcache.memory_consumption=128 ; The amount of memory for interned strings in Mbytes. ;opcache.interned_strings_buffer=8 ; The maximum number of keys (scripts) in the OPcache hash table. ; Only numbers between 200 and 1000000 are allowed. ;opcache.max_accelerated_files=10000 ; The maximum percentage of "wasted" memory until a restart is scheduled. ;opcache.max_wasted_percentage=5 ;opcache.use_cwd=1 ;opcache.validate_timestamps=1 ;opcache.revalidate_freq=2 ;opcache.revalidate_path=0 ;opcache.save_comments=1 ;opcache.enable_file_override= ;opcache.optimization_level=0x7FFFBFFF ;opcache.dups_fix=0 ;opcache.blacklist_filename= ;opcache.max_file_size=0 ;opcache.consistency_checks=0 ;opcache.force_restart_timeout=180 ;opcache.error_log= ;opcache.log_verbosity_level=1 ;opcache.preferred_memory_model= ;opcache.protect_memory=0 ;opcache.restrict_api= ;opcache.mmap_base= ; Facilitates multiple OPcache instances per user (for Windows only). All PHP ; processes with the same cache ID and user share an OPcache instance. ;opcache.cache_id= ; Enables and sets the second level cache directory. ; It should improve performance when SHM memory is full, at server restart or ; SHM reset. The default "" disables file based caching. ;opcache.file_cache= ; Enables or disables opcode caching in shared memory. ;opcache.file_cache_only=0 ; Enables or disables checksum validation when script loaded from file cache. ;opcache.file_cache_consistency_checks=1 ; Implies opcache.file_cache_only=1 for a certain process that failed to ; reattach to the shared memory (for Windows only). Explicitly enabled file ; cache is required. ;opcache.file_cache_fallback=1 ; Enables or disables copying of PHP code (text segment) into HUGE PAGES. ; This should improve performance, but requires appropriate OS configuration. ;opcache.huge_code_pages=1 ; Validate cached file permissions. ;opcache.validate_permission=0 ; Prevent name collisions in chroot'ed environment. ;opcache.validate_root=0 ; If specified, it produces opcode dumps for debugging different stages of ; optimizations. ;opcache.opt_debug_level=0 ; Specifies a PHP script that is going to be compiled and executed at server ; start-up. ; http://php.net/opcache.preload ;opcache.preload= ; Preloading code as root is not allowed for security reasons. This directive ; facilitates to let the preloading to be run as another user. ; http://php.net/opcache.preload_user ;opcache.preload_user= ; Prevents caching files that are less than this number of seconds old. It ; protects from caching of incompletely updated files. In case all file updates ; on your site are atomic, you may increase performance by setting it to "0". ;opcache.file_update_protection=2 ; Absolute path used to store shared lockfiles (for *nix only). ;opcache.lockfile_path=/tmp [curl] ; A default value for the CURLOPT_CAINFO option. This is required to be an ; absolute path. ;curl.cainfo = [openssl] ; The location of a Certificate Authority (CA) file on the local filesystem ; to use when verifying the identity of SSL/TLS peers. Most users should ; not specify a value for this directive as PHP will attempt to use the ; OS-managed cert stores in its absence. If specified, this value may still ; be overridden on a per-stream basis via the "cafile" SSL stream context ; option. ;openssl.cafile= ; If openssl.cafile is not specified or if the CA file is not found, the ; directory pointed to by openssl.capath is searched for a suitable ; certificate. This value must be a correctly hashed certificate directory. ; Most users should not specify a value for this directive as PHP will ; attempt to use the OS-managed cert stores in its absence. If specified, ; this value may still be overridden on a per-stream basis via the "capath" ; SSL stream context option. ;openssl.capath= [ffi] ; FFI API restriction. Possible values: ; "preload" - enabled in CLI scripts and preloaded files (default) ; "false" - always disabled ; "true" - always enabled ;ffi.enable=preload ; List of headers files to preload, wildcard patterns allowed. ;ffi.preload= 

8. output service nginx status & service php7.4-fpm status


# sudo service php7.4-fpm status ● php7.4-fpm.service - The PHP 7.4 FastCGI Process Manager Loaded: loaded (/lib/systemd/system/php7.4-fpm.service; enabled; vendor preset: enabled) Active: active (running) since Tue 2020-03-03 17:01:34 CET; 1min 59s ago Docs: man:php-fpm7.4(8) Process: 620 ExecStartPost=/uslib/php/php-fpm-socket-helper install /run/php/php-fpm.sock /etc/php/7.4/fpm/pool.d/www.conf 74 (code=exited, status=0/SUCCESS) Main PID: 598 (php-fpm7.4) Status: "Processes active: 0, idle: 2, Requests: 0, slow: 0, Traffic: 0req/sec" Tasks: 3 (limit: 4915) Memory: 12.4M CGroup: /system.slice/php7.4-fpm.service ├─598 php-fpm: master process (/etc/php/7.4/fpm/php-fpm.conf) ├─618 php-fpm: pool www └─619 php-fpm: pool www Mär 03 17:01:34 user systemd[1]: Starting The PHP 7.4 FastCGI Process Manager... Mär 03 17:01:34 user systemd[1]: Started The PHP 7.4 FastCGI Process Manager. 

# sudo service nginx status ● nginx.service - A high performance web server and a reverse proxy server Loaded: loaded (/lib/systemd/system/nginx.service; enabled; vendor preset: enabled) Active: active (running) since Tue 2020-03-03 17:01:39 CET; 2s ago Docs: man:nginx(8) Process: 639 ExecStartPre=/ussbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=0/SUCCESS) Process: 657 ExecStart=/ussbin/nginx -g daemon on; master_process on; (code=exited, status=0/SUCCESS) Main PID: 658 (nginx) Tasks: 5 (limit: 4915) Memory: 4.9M CGroup: /system.slice/nginx.service ├─658 nginx: master process /ussbin/nginx -g daemon on; master_process on; ├─659 nginx: worker process ├─660 nginx: worker process ├─661 nginx: worker process └─662 nginx: worker process Mär 03 17:01:39 user systemd[1]: Starting A high performance web server and a reverse proxy server... Mär 03 17:01:39 user systemd[1]: Started A high performance web server and a reverse proxy server. 
submitted by xmr123 to PHPhelp [link] [comments]

Binary Options - The Best Binary Options Trading Guide For ... SWISS Methode ENTLARVT: der reinste Betrug Binary com digit differ bot xml download 2019 strategy ... BINARY OPTIONS STRATEGY- Binary Options Newest Method 2020 WITHDRAW MONEY  POCKET OPTION  BINARY OPTIONS - YouTube IQ Option-Binary Options Strategy II Day 2 LOCKING METHOD : Making ZERO RISK in Binary Options Trading - options Strategies Best Indicators for Binary Options Trading How to Trade Binary Options - $2300 in 2 days –Real account - Binary Trading – Binary Options

XMLStarlet is a set of command line utilities (tools) which can be used to transform, query, validate, and edit XML documents and files using simple set of shell commands in similar way it is done for plain text files using UNIX grep, sed, awk, diff, patch, join, etc commands.. This set of command line utilities can be used by those who deal with many XML documents on UNIX shell command prompt ... Why is an iso-8859-1 character not converted to utf-8 in the output file when setting output encoding to utf-8? I have an xml input file in iso-8859-1 encoding, and the encoding is declared. I want to output it in utf-8. My understanding is that setting the output encoding in the xslt file should manage the character conversion. Die Beispieldateien collection.xml und collection.xsl. Viele Beispiele in dieser Referenz erfordern sowohl eine XML- als auch XSL-Datei. Die Dateien collection.xml und collection.xsl bestehen jeweils aus folgendem Inhalt: However, being able to generate a multi-sheet Excel output is a bit more tricky. For those of you using the standalone release the Excel Analyzer button can help you out. You can build Excel templates that can then be loaded back to the server and used as a template, at runtime generating binary multisheet Excel output. These templates rely on ... Slide 10: An XSL stylesheet. An XSL stylesheet basically consists of a set of templates. Each template "matches" some set of elements in the source tree and then describes the contribution that the matched element makes to the result tree Specifies axf:output-volume-break="true" to fo:page-sequence where you want to start separating the volume. The document number increases one by one. When separating the volume, axf:output-volume-break="true" is regarded as always being specified to the first fo:page-sequence. If axf:output-volume-break="false" is specified explicitly, it is ... XStream is delivering additional drivers for JSON and a compact binary format (see ... Implementing a readResolve method that can be used to initialize additional fields; Usage of annotations ; Preprocessing or postprocessing XML Transformations. Never forget, you're dealing with XML! It is easy to transform XML with an XSLT. XStream is delivered with a SAXSource implementation, that allows an ... Jak działa method_ call_ server_ xmlrpc wywołanie funkcji Parses XML requests and call methods, błędy i użycie string xmlrpc_server_call_method ( resource server, string xml, mixed user_data [, array output_options] ). The former supports <xsl:output> and all options related to writing out output that might not be valid XML (including the disable output escaping). The latter is pure XML-to-XML tree returned, so no <xsl:output> or disabled escaping can be used since nothing's being output, just a DOM tree fragment of the result is being returned. XSL-T Examples Protocol Buffers library for idiomatic .NET . Contribute to protobuf-net/protobuf-net development by creating an account on GitHub.

[index] [17180] [2640] [10538] [8539] [3440] [20121] [17751] [17056] [6681] [1770]

Binary Options - The Best Binary Options Trading Guide For ...

LOCKING METHOD : Making ZERO RISK in trading - Binary Options Trading Strategy if You NEED FREE Signals, Conect with me !!! 1. Visit My Twitter Account https://goo.gl/XgsUgZ 2. Quitting binary option and pausing your trading with the markets basically because of recent failures? Well I was at the verge of giving up but on the other hand I understood that giving up wasn't ... Find out why Close. SWISS Methode ENTLARVT: der reinste Betrug Aktienrunde - Trading für Berufstätige ... swiss methode betrug binäre optionen strategie binäre optionen betrug binäre optionen ... Binary.com Volatility 25 index: Digit over and Digit Differ Continuous Winning Strategy. Sign up for free trading account to try on demo .using the link below: https://bit.ly/35gaZwn STEPS 1) Open ... Binary Options Are Never Guaranteed To Profit 100% Of the Time. But This Strategy Sets the Bar HIGH. See inside here: http://tinyurl.com/RecommendedBrokerB... Typical Method– This can be the oldest and many utilized trading technique in binary options. It truly is regarded as A lot safer and is also a favourite of beginner traders. It doesn’t give A ... I hope this video was useful for you! Have a good trades 😉 _____ 👨🏽‍💻 Broker I've been using for the last few years : 👉 https://pocketoption-... How to Trade Binary Options -$2300 in 2 days –Real account - Binary Trading – Binary Options, Expert option deposit-real trading- withdrawal and expert option strategy, Read full review: http ... Subscribe free here : https://goo.gl/tPqKFZ IQ OPTION 2019 Learn How I - Binary Options Newest Method IQ Option-Binary Options Strategy IQ option 100% real a... These are some of the best indicators for Binary Options trading which I strongly recommend. These indicators will help to identify market consolidations, br...

http://arab-binary-option.loademan.ga